Avaliação do desempenho mecânico de misturas asfálticas autorregenerativas com adição de fibras de aço, escória de alto forno e pó de grafite / Evaluation of the mechanical performance of self-healing asphalt mixtures with addition of steel fibers, steel slag and graphite poder

Authors

  • Vanesssa Bacca Couto Joenck
  • Joe Arnaldo Villena Del Carpio
  • João Victor Staub de Melo

DOI:

https://doi.org/10.34117/bjdv6n11-352

Keywords:

Autorregeneração, Mistura asfáltica, Aquecimento por micro-ondas, Caracterização mecânica, Fadiga.

Abstract

Misturas asfálticas autorregenerativas são materiais capazes de regenerar trincas produzidas pela fadiga. O fenômeno da autorregeneração consiste em introduzir materiais suscetíveis ao aquecimento por micro-ondas em misturas asfálticas. Contudo, é necessário que estas misturas possuam um adequado desempenho frente às ações oriundas do tráfego de veículos. Portanto, o objetivo principal deste é avaliar o desempenho mecânico de misturas asfálticas contendo adições eletricamente condutivas como fibras de aço, escória e pó de grafite. Para tal, foram produzidas misturas asfálticas com a adição de escória de alto forno, fibras de aço, pó de grafite e uma mistura de controle (sem adições). Foram realizados ensaios de resistência à tração, módulo resiliente e fadiga por compressão diametral. Em seguida, efetuou-se análise mecanicista de uma estrutura de pavimento flexível hipotético por meio do software AEMC. Concluiu-se que o uso de adições diminui a resistência à tração e aumenta o módulo resiliente das misturas. Em relação à fadiga, o uso de algumas das adições diminuiu a vida útil estimada da mistura, enquanto que o uso de 15% de pó de grafite permitiu incrementar o desempenho à fadiga a um nível superior ao da mistura sem adição. Os dados obtidos no presente estudo contribuem para o desenvolvimento e o avanço de pesquisas para recuperação de estruturas de pavimentos asfálticos a partir do uso da técnica da autorregeneração.

References

AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D 6931 - 17: Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures. Philadelphia, 2017.

______. ASTM D 4123: Standard Specification for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures. Philadelphia, 1982.

BARDINI, Vivian Silveira dos Santos, KLINSKY, Luis Miguel Gutiérrez; FERNANDES JR, José. A importância do fíler para o bom desempenho de misturas asfálticas. Revista Minerva, pesquisa e tecnologia, v. 7, 2009.

BRASIL. DEPARTAMENTO NACIONAL DE INFRAESTRUTURA E TRANSPORTES - DNIT. Manual de pavimentação. Rio de Janeiro, 2006.

BUCHWEITZ, Andrise; FAXINA, Adalberto Leandro. Comportamento à fadiga de misturas asfálticas finas com adição de mistura asfáltica fresada e resíduo de óleo de xisto. XXXI ANPET - Congresso Nacional de Pesquisa e Ensino em Transportes. Recife, 2017.

CHEN, J. S. WEIN, S. H. Engineering properties and performance of asphalt mixtures incorporating steel slag. Construction and Building Materials, v. 128, p. 148-143, 2016. Disponível em: < https://www.sciencedirect.com/science/article/abs/pii/S0950061816316415>. Acesso em: 13 nov. 2019.

CONTRERAS, J. N., et al. Effect of fibres addition on the physical and mechanical properties of asphalt mixtures with crack-healing purposes by microwave radiation. Materials & design, v. 106, p. 404-414, 2016. Disponível em: < http://www.sciencedirect.com/science/article/pii/S0264127516307006 >. Acesso em: 19 abr. 2017.

EN 12697-24: 2018. Bituminous mixtures. Test methods. Part 24: Resistance to fatigue. Comissão Europeia de Normalização (CEN). Bruxelas, 2018.

FHWA, FEDERAL HIGHWAY ADMINISTRATION; NHI, NATIONAL HIGHWAY INSTITUTE. Superpave Fundamentals Reference Manual, FHWA-NHI-131053, 2000.

FRANCO, F.A.C.P. MeDiNa. Versão 1-1-1. São Paulo, 2018.

FRANESQUI, M. A.; YEPES, J.; GONZÁLEZ, C. G. Top-down cracking self-healing of asphalt pavements with steel fíler from industrial waste applying microwaves. Construction and Building Materials, v. 149, p.612-620, 2017. Disponível em: < http://www.sciencedirect.com/science/article/pii/S0950061817310553>. Acesso em: 10 ago. 2017.

GALLEGO, J. et al. Heating asphalt mixtures with microwaves to promote self-healing. Construction and Building Materials, v. 42, p.1-4, 2013. Disponível em: < http://www.sciencedirect.com/science/article/pii/S0950061812009634>. Acesso em: 14 jul. 2017.

GARCÍA, Alvaro. Self-healing of open cracks in asphalt mastic. Fuel, v. 93, 2012.

GARCÍA, Alvaro et al. Optimization of composition and mixing process of a self-healing porous asphalt. Construction and Building Materials, v.30, p. 59-65, dez. 2012. Disponível em: <http://www.sciencedirect.com/science/article/pii/S0950061811006647>. Acesso em: 30 mar. 2017.

GARCÍA, Alvaro et al. Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers. Construction and Building Materials, Switzerland, v.43, p.107-117, mar. 2013. Disponível em: < https://www.sciencedirect.com/science/article/pii/S0950061813000949>. Acesso em: 18 mar. 2017.

GARCÍA, Alvaro; CONTRERAS, José Norambuen; PARTL, Manfred N. A parametric study on the influence of steel wool fibers in dense asphalt concrete. Materials and Structures, v.47, n.9, p.1559–1571, jul. 2013. Disponível em: < https://www.researchgate.net/publication/247158351_A_parametric_study_on_the_influence_of_steel_wool_fibers_in_dense_asphalt_concrete>. Acesso em: 12 abr. 2017.

KÖK, B. V.; YILMAZ, M.; ERKUS, Y. Effects of graphite on mechanical properties of stone mastic asphalt pavement. Journal of civil engineering and management, v. 23, n. 8, p.1013-1020, 2017. Disponível em: < https://www.researchgate.net/publication/321185784_Effects_of_graphite_on_mechanical_properties_of_stone_mastic_asphalt_pavement>. Acesso em: 12 abr. 2018.

LIU, Q.; WU, S.; SCHLANGEN, E. Induction heating of asphalt mastic for crack control. Construction and Building Materials, v.41, p.345-351, 2013. Disponível em: <http://www.sciencedirect.com/science/article/pii/S0950061812009117>. Acesso em: 03 mai. 2017.

MENDES, L. O. Utilização do método Bailey para a seleção de agregados em dosagem de misturas asfálticas. Dissertação de Mestrado - Universidade Federal de Juiz de Fora, Juiz de Fora - MG, 2011

O’FLAHERTY, C. A. et al. Highways: The location, design, construction and maintenance of road pavements. 4ed. Grã-Bretanha: Elsevier Ltd., 2007.571p.

PASETTO, M.; BALDO, N. Mix design and performance analysis of asphalt concretes with electric arc furnace slag. CONSTRUCTION AND BUILDING MATERIALS, V.25, P. 3458-3468. 2011. Disponível em:<https://www.sciencedirect.com/science/article/abs/pii/S0950061811000833?via%3Dihub>. ACESSO EM: 13 NOV. 2019.

PASETTO, M.; BALDO, N. Fatigue Performance of Asphalt Concretes with RAP Aggregates and Steel Slags. RILEM 2012, pp. 719–727, 2012. Disponível em:< https://link.springer.com/chapter/10.1007/978-94-007-4566-7_70>. Acesso em: 25 abr. 2017.

SUN, Y. et al. Microwave Heating of Steel Slag Asphalt Mixture. Key Engineering Materials, v. 599, p. 193-197, 2014. Disponível em: < https://www.researchgate.net/publication/269377629_Microwave_Heating_of_Steel_Slag_Asphalt_Mixture>. Acesso em: 20 mai. 2018.

SUN, Y. et al. Self-healing performance of asphalt mixtures through heating fibers or aggregate. Construction and Building Materials, v.150, p. 673-680. 2017. Disponível em: < http://www.sciencedirect.com/science/article/pii/S0950061817311388 >. Acesso em: 20 mai. 2018.

ZHU, Xingyi. et al. Self-healing efficiency of ferrite-filled asphalt mixture after microwave Irradiation. Construction and Building Materials, v. 141, 2017. p. 12–22. Disponível em:<http://www.sciencedirect.com/science/article/pii/S095006181730346X>. Acesso em: 26 ago. 2017

WANG, Z. et al. Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers. Construction and Building Materials, v.122, p. 184-190. 2016. Disponível em: < https://www.sciencedirect.com/science/article/pii/S0950061816309916 >. Acesso em: 22 jul. 2017.

WANG, H. et al. Laboratory test and numerical simulation of microwave heating properties of asphalt mixture. BCRRA, 2017. Disponível em: <https://www.researchgate.net/publication/318679778_Laboratory_test_and_numeric al_simulation_of_microwave_heating_properties_of_asphalt_mixture >. Acesso em: 16 ago. 2017.

Published

2020-11-17

How to Cite

Joenck, V. B. C., Carpio, J. A. V. D., & Melo, J. V. S. de. (2020). Avaliação do desempenho mecânico de misturas asfálticas autorregenerativas com adição de fibras de aço, escória de alto forno e pó de grafite / Evaluation of the mechanical performance of self-healing asphalt mixtures with addition of steel fibers, steel slag and graphite poder. Brazilian Journal of Development, 6(11), 88967–88984. https://doi.org/10.34117/bjdv6n11-352

Issue

Section

Original Papers