Capacidade instalada de energia elétrica no Brasil: um estudo a partir do controle estatístico de processo utilizando Carta X e R/ Installed electricity capacity in Brazil: a study from the statistical process control using Charter X and R

Authors

  • André Luiz Marques Serrano
  • Lucas Oliveira Gomes Ferreira
  • Nara Cristina Ferreira Mendes
  • Clovis Neumann

DOI:

https://doi.org/10.34117/bjdv7n10-437

Keywords:

Energia Elétrica, Engenharia de Produção, Controle Estatístico, Carta de Controle.

Abstract

Por meio da utilização do Controle Estatístico do Processo (CEP) para analisar a capacidade instalada de energia elétrica, a presente pesquisa analisou o comportamento da capacidade instalada de energia elétrica no Brasil entre 2012 e 2021 de forma a obter níveis adequados de qualidade. Obteve-se uma faixa recomendada através do gráfico de controle np, que possibilita identificar o número de medições que estão fora dos limites de especificação e determinar o percentual de medições fora desses limites. Esse valor percentual, inclusive, é um indicador importante para a verificação da eficácia das ações corretivas. Os resultados possibilitam direcionar as seguintes ações de melhorias através dos gráficos de controle: 1) ações corretivas pontuais, como a alteração da potência instalada de bancos de capacitores, alteração do TAP de transformadores de força, revisão de ajustes de reguladores; 2) investimentos de médio porte para minimizar a variabilidade da capacidade instalada mês a mês durante os anos que foram pesquisados; e 3) investimentos de grande porte, como obras de expansão e reforço do sistema elétrico. Como em alguns meses a capacidade apresentou variabilidade, mas não saiu do controle estatístico e tão pouco ficou fora dos limites de especificação, foi possível observar que se esperam melhorias nos níveis de potência, mas com necessidade de maiores investimentos adicionais para apoiar no crescimento e desenvolvimento do país.

References

ANEEL – Agência Nacional de Energia Elétrica. Sistema de Informação de geração de energia (2020). Disponível em: < http://www.epe.gov.br/sites-pt/publicacoes-dados-abertos/publicacoes/PublicacoesArquivos/publicacao-479/topico-528/BEN2020_sp.pdf >. Acesso em: 26 set 2021.

ANTONY, J.; LIM, S. A. H.; ARSHED, N. A critical assessment on SPC implementation in the UK food industry. WMSCI 2015 - 19th World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings (2015).

ADINYIRA, E.; AYARKWA, J.; AIDOO, I. Knowledge and Usage of the Seven Basic Quality Control Tools By Producers of Precast Concrete Products in Ghana. Journal of Construction Project Management and Innovation, v. 4, n. 2, 2014.

BELISÁRIO, C. D. A.; BAHIENSE, D. A.; OLIVEIRA, G. M. Continuidade nos serviços de distribuição de energia elétrica. Conjuntura & Planejamento, n. 105, p. 36-40, 2003.

DEMING, W. E. Out of the crisis. Cambridge: MIT Press, 2000.

EISENHARDT, K. M. Building theories from case study research. Academy of Management Review, v. 14, n. 4, p. 532-550, 1989.

GEJDOŠ, P. Continuous Quality Improvement by Statistical Process Control. Procedia Economics and Finance, v. 34, p. 565-572, 2015. http://doi.org/10.1016/s2212-5671(15)01669-x

GODINA, R.; MATIAS, J. C. O.; AZEVEDO, S. G. Quality improvement with statistical process control in the automotive industry. International Journal of Industrial Engineering and Management, v. 7, n. 1, p. 1-8, 2016.

GOHEL, J.; SARKAR, D. Comparative study of cusum with v-mask and ewma control charts for strength monitoring of ready mixed concrete. Interanational Journal of Advaned Technology in Engineering and Science (IJATES), v. 5, n. 1, p. 63-71, 2017.

HAKIMI, S.; ZAHRAEE, S. M.; MOHD ROHANI, J. Application of Six Sigma DMAIC methodology in plain yogurt production process. International Journal of Lean Six Sigma, v. 9, n. 4, p. 562-578, 2018. http://doi.org/10.1108/IJLSS-11-2016-0069

JOSKOW, P. L.; SCHMALENSEE, R. Markets power: an analysis of electric utility deregulation. Cambridge: MIT Press, 1983

LADE, A. D.; NAIR, A. S.; CHAUDHARY, P. G.; GUPTA, N. R. Implementing Six Sigma Approach for Quality Evaluation of a RMC Plant at Mumbai, India. IOSR Journal of Mechanical and Civil Engineering, v. 12, n. 2. p. 1-4, 2015. http://doi.org/10.9790/1684-12210104

LEE, S. P.; WONG, D. S. H.; SUN, C. I.; CHEN, W. H.; JANG, S. S. Integrated statistical process control and engineering process control for a manufacturing process with multiple tools and multiple products. Journal of Industrial and Production Engineering, v. 32, n. 3, 2015. http://doi.org/10.1080/21681015.2015.1026419

LIM, S. A. H.; PRIYONO, A.; MOHAMAD, S. F. Introducing a Six Sigma Process Control Technique in a Food Production Line: Step-by-step Guideline and Critical Elements of the Implementation. 2019 IEEE 6th International Conference on Industrial Engineering and Applications, ICIEA, p. 338-342, 2019. http://doi.org/10.1109/IEA.2019.8715119

LIN, Y. C.; CHOU, C. Y. On the design of variable sample size and sampling intervals X charts under non-normality. International Journal of Production Economics, v. 96, n. 2, p. 249-261, 2005.

MAGAR, V. M.; SHINDE, V. B. Application of 7 Quality Control (7 QC) Tools for Continuous Improvement of Manufacturing Processes. International Journal of Engineering Research and General Science, 2, 364-371, 2014.

MARTINS, P.; LAUGENI, F. P. Administração da Produção. 2.ed. São Paulo: Saraiva, 2005.

MEMON, I. A.; ALI, A.; MEMON, M. A.; RAJPUT, U. A.; ABRO, S. A. K.; MEMON, A. A. Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory. Engineering, Technology & Applied Science Research, v. 9, n. 6, p. 5062-5065, 2019. http://doi.org/10.48084/etasr.3160

MENGESHA, Y.; SINGH, A. P.; AMEDIE, W. Y. Quality Improvement Using Statistical Process Control Tools in Glass Bottles Manufacturing Company. International Journal for Quality Research, v. 7, n. 1, p. 107-126, 2013.

MONTGOMERY, D. C. Introduction to Statistical Quality Control, Sixth Edition. In: John Wiley & Sons, Inc, 2009.

NEYESTANI, B. Seven Basic Tools of Quality Control: The Appropriate Techniques for Solving Quality Problems in the Organizations. SSRN Electronic Journal, 2018. http://doi.org/10.2139/ssrn.2947700

PARMAR, P. S.; DESHPANDE, V. A. Implementation of Statistical Process Control Techniques in Industry: A Review. Journal of Emerging Technologies and Innovative Research, v. 1, n. 6, p. 583-587, 2014.

PORTILHO, G. R., FERREIRA, C. A. M., PROENÇA, F. O., LUCAS, V. H. S.; OLIVEIRA, M. C. F. A importância da estatística descritiva no setor de qualidade em uma empresa de garrafas plásticas. Revista Mythos, v. 15, n. 1, p. 45-57, 2021. http://doi.org/10.36674/mythos.v15i1.549

SCHAEFFER, R.; COHEN, C.; ALMEIDA, M. A.; ACHÃO, C. C.; CIMA, F. M. Energia e pobreza: problemas de desenvolvimento energético e grupos sociais marginais em áreas rurais e urbanas do Brasil. Santiago: CEPAL, 2003. 84 p.

SHAHIN, A.; MAZAHER, G.; ARABZAD, S. M. Proposing an Integrated Framework of Seven Basic and New Quality Management Tools and Techniques: A Roadmap. Research Journal of International Studies-Issue, v. 17, 2010.

SOUSA, S.; RODRIGUES, N.; NUNES, E. Application of SPC and Quality Tools for Process Improvement. Procedia Manufacturing, v. 11, p. 1215-1222, 2017. http://doi.org/10.1016/j.promfg.2017.07.247

SUBBULAKSHMI, S.; KACHIMOHIDEEN, A.; SASIKUMAR, R.; DEVI, S. B. An Essential Role of Statistical Process Control in Industries. International Journal of Statistics and Systems, 2017.

SUMAN, G.; PRAJAPATI, D. R. Control chart applications in healthcare: A literature review. International Journal of Metrology and Quality Engineering, v. 9, 2018. http://doi.org/10.1051/ijmqe/2018003

SHEWHART, W. A. Economic Control of Quality of Manufactured Product. New York: Van Nostrand, 1931.

VACCARO, G. L. R.; MORAES, C. A. M.; RICHTER, C.; FINK, D.; SCHERRER, T. O Processo de Inovação em Tríplice Hélice: uma Análise de Casos da Coréia do Sul. 80 Congresso Brasileiro de Gestão de Desenvolvimento de produto. Anais.... Porto Alegre, Brasil, v. 12, 2011.

Published

2021-10-29

How to Cite

Serrano, A. L. M., Ferreira, L. O. G., Mendes, N. C. F., & Neumann, C. (2021). Capacidade instalada de energia elétrica no Brasil: um estudo a partir do controle estatístico de processo utilizando Carta X e R/ Installed electricity capacity in Brazil: a study from the statistical process control using Charter X and R. Brazilian Journal of Development, 7(10), 101194–101218. https://doi.org/10.34117/bjdv7n10-437

Issue

Section

Original Papers