Validação do modelo matemático de secagem de grãos de milho em leito fixo utilizando CFD / Validation of the mathematical model of corn grain drying in fixed bed using CFD

Authors

  • Fernando Azalim Júnior
  • Estevão Lannes Tolentino
  • José Leôncio Fonseca de Souza
  • Leonardo Alves da Costa
  • André Guimarães Ferreira
  • André Almeida Dias

DOI:

https://doi.org/10.34117/bjdv8n6-362

Keywords:

Secagem de milho, CFD.

Abstract

A Fluidodinâmica computacional (CFD) foi usada para simular o comportamento de secagem de um secador de milho de leito fixo bidimensional. O modelo matemático foi validado por meio da comparação com dados experimentais presentes na literatura e foi resolvido com o software ANSYS Fluent 18.0. A ferramenta adicional User-Defined Function (UDF), escrita em linguagem C, foi utilizada para customizar o software, permitindo inserir um modelo de secagem mais completo. O erro relativo percentual (ER%) entre os resultados numéricos e experimentais para o modelo unidimensional variou entre 5,44% e 12,46% demonstrando uma boa predição do comportamento da secagem do leito de grãos de milho. Para o modelo bidimensional, o valor máximo para desvio padrão relativo percentual (DPR%) entre a simulação numérica do modelo proposto e as simulações apresentadas por França et al. (1994) e Souza (1996) foi de 9,39%, também demonstrando uma boa predição

References

ANDRADE, E. T.; COUTO, S. M.; QUEIROZ, D. M.; PEIXOTO, A. B. Determinação de propriedades térmicas de grãos de milho. Ciência e Agrotecnologia, Lavras, v. 28, n. 3, p. 488-498, 2004.

ASAE D245.6. Moisture relationships of plant-based agricultural products. Saint Joseph: ASABE, 2007.

BARKER, J. Heat transfer in packed beds. Industrial and Engineering Chemistry, v. 57, n. 4, p. 43-51, 1956.

BROOKER, D. B.; BAKKER-ARKEMA, F. W.; HALL, C. W. Drying cereal grains. Westport: The AVI Publishing Company Inc., 1974. 265 p.

BROOKER, D. B.; BAKKER-ARKEMA, F. W.; HALL, C. W. Drying and storage of grains and oilseeds. Nova Iorque: Van Nostrand Reinold, 1992. 450 p.

DEFRAEYE, T. Advanced computational modelling for drying processes - A review. Applied Energy, v. 131, p. 323-344, 2014.

DE OLIVEIRA, Wanderson Leandro; MARTINS, José Helvecio. Simulação de secagem de milho em camada estacionária por meio de modelagem computacional. Brazilian Journal of Development, v. 6, n. 8, 2020.

FAGHRI, A.; ZHANG, Y.; HOWELL, J. Advanced heat and mass transfer. Columbia: Global Digital Press, 2010. p. 956.

FORTES, M.; FERREIRA, D. A.; FERREIRA, W. R.; SOUZA. A. C. Modelagem de um condicionador de ar de alta precisão para uso em processamento agrícola. Engenharia Agrícola, Jaboticabal, v. 26, n. 2, p. 578-589, 2006.

FRANÇA, A. S.; MARTINS, M.; HAGHIGHI, K. Numerial simulation of intermittent and continuous deep-bed drying of biological materials. Drying Technology, v. 12, n. 7, p. 1537-1560, 1994.

HUNTER, A. J. Pressure difference across an aerated seed bulk for some common duct ant store cross-sections. Journal of Agricultural Engineering Research, v. 28, n. 5, p. 437-450, 1983.

JAMALEDDINE, T, J.; RAY, M. B. Application of Computational Fluid Dynamics for Simulation of Drying Processes: A Review. Drying Technology, v. 28, n. 2, p. 120-154, 2010.

LASSERAN, J. C. Princípios gerais de secagem. Revista Brasileira de Armazenamento, v.3, n. 3, p. 17-46. 1978.

MARTINS, J, H.; PINHEIRO FILHO, J. B.; FORTES, M.; SEDIYAMA, G. C. Simulação de secagem de milho em camada estacionária. Revista Brasileira de Armazenamento, v. 7, n. 1, p. 5-18, 1982.

NAGHAVI, Z.; MOHEB, A.;

ZIAEI-RAD, S. Numerical simulation of rough rice drying in a deep-bed dryer using non-equilibrium model. Energy Conversion and Management, v. 51, n. 2, p. 258-264, 2010.

NIELD, D.; BEJAN, A. Convection in porous media. 4.ed. Nova Iorque: Springer, 2013. 778 p.

NORTON, T.; SUN, D. W. Computational fluid dynamics (CFD)-an effective and efficient design and analysis tool for the food industry: a review. Trends in Food Science & Technology, v. 17, n. 11, p. 600-620, 2006.

PABIS, S.; JAYAS, D. S.; CENKOWSKI, S. Grain drying – theory and practice. Nova Iorque: John Wiley & Sons, 1998. 311 p

PAKOWSKI, Z.; BARCTCZAK, Z.; STRUMILLO, C.; STENSTROM, S. Evaluation of equations approximating thermodynamic and transport properties of water, steam and air for use in cad of drying processes. Drying Technology, v. 9, n. 3, p. 753-773, 1991.

RANJBARAN, M.; ZARE, D. Simulation of energetic and exergetic performance of microwave-assisted fluidized bed drying of soybeans. Energy, v. 59, p. 484-493, 2013.

RANJBARAN, M.; EMADI, B.; ZARE, D. CFD simulation of deep-bed paddy drying process and performance. Drying Technology, v. 32, n. 8, p. 919-934, 2014.

ROCHA, K. S.; MARTINS, J. H.; MARTINS, M. A.; SARAZ, J. A.; LACERDA FILHO, A. F. Three-dimensional modeling and simulation of heat and mass transfer processes in porous media: An application for maize stored in a flat bin. Drying Technology, v. 31, n. 10, p. 1099-1106, 2013.

SILVA, J. S. Secagem e armazenamento de produtos agrícolas. 2.ed. Viçosa: Aprenda Fácil, 2008. 560 p.

SOUZA, J. L. F. Simulação de secador cilíndrico de grãos com fluxos radial e axial de ar. 97 f. Dissertação de Mestrado. Belo Horizonte: UFMG, 1996.

SRIVASTAVA, V. K.; JOHN, J. Deep bed grain drying modeling. Energy Conversion and Management, v. 43, n. 13, p. 1689-1708, 2002.

THOMPSON, T. L., PEART, R. M.; FOSTER, G. H. Mathematical simulation of corn drying – A new model. ASAE, Saint Joseph, v. 11, n. 4, p. 582-586, 1968.

THORPE, G. R. The application of computational fluid dynamics codes to simulate heat and moisture transfer in stored grains. Journal of Stored Products Research, v. 44, n. 1, p. 21-31, 2008.

TOLENTINO, E. L. Análise energética e exergética da secagem de grãos de milho em leito fixo utilizando o modelo CFD. x f. Dissertação de Mestrado. Belo Horizonte: CEFET-MG, 2018.

TURNER, I.; ARUN, S.; MUJUMDAR, A. R.; Mathematical modeling and numerical techniques in drying technology. Nova Iorque: Marcel Dekker, 1997. 679 p.

VITORINO, R. B. Modelagem e simulação matemática do processo de secagem de milho. 52 f. Dissertação de Mestrado. Dourados: UFGD, 2009.

XIA, B.; SUN, D. W. Applications of computational fluid dynamics (CFD) in the food industry: a review. Computers and Electronics in Agriculture, v. 34, n. 1-3, p. 5-24, 2002.

ZARE, D.; MINAEI, S.; ZADEH, M. M.; KHOSHTAGHAZA, M. H. Computer simulation of rough rice drying in a batch dryer. Energy Conversion and Management, v. 47, n. 18, p. 3241-3254, 2006.

Published

2022-06-28

How to Cite

Júnior, F. A., Tolentino, E. L., Souza, J. L. F. de, Costa, L. A. da, Ferreira, A. G., & Dias, A. A. (2022). Validação do modelo matemático de secagem de grãos de milho em leito fixo utilizando CFD / Validation of the mathematical model of corn grain drying in fixed bed using CFD. Brazilian Journal of Development, 8(6), 48209–48227. https://doi.org/10.34117/bjdv8n6-362

Issue

Section

Original Papers